Ground Zero Precision

Show expired deals


Deal Image DIY 16" .223 / 5.56 Carbine AR15 A2 Project Kit w/ Sights (4P) - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $444.86 (Ground Zero Precision)
Updated: 5/26/2017 (today)
This project kit includes all of the following high-quality parts: 16" Modern Contour Profile .223 / 5.56 Chambered, 1:7 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black) Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ground Zero Precision Rail Height, Top Railed .750 Gas Block - 7075 T6 Aluminum, Anodized Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Sight Set Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Nitride Enhanced Mil-Spec Lower Parts Kit Mil-Spec 7075-T7 Aluminum Buffer Tube - Black Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black "Slick Kote" Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate A2 Style Hand Guard A2 Style Delta Ring A2 Style Barrel Nut A2 Style Weldon Spring A2 Style Snap Ring A2 Style Hand Guard Cap (Round)
Current Deal
1102 views | 1 Comment | E-Mail Deal


Deal Image Next Level Armament Billet Fifteen AR-15 Builder's Chassis - STEAMPUNK - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $503.10 (Ground Zero Precision)
Updated: 5/25/2017 (1 day ago)
This custom AR-15 builders chassis is like none you've ever seen before! Starting with the new Next Level Armament Billet Fifteen ultra light weight AR-15 receiver set and free-float handguard and finished in a beautiful and durable Antiqued Steampunk cerakote by Armscoat this set is sure to turn some heads.
Current Deal
236 views | 0 Comments | E-Mail Deal


Deal Image Anderson Rifles AM15 223/5.56 16" Chrome Moly 1:8 M4 Contour Optic Ready AR-15 - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $405.00 (Ground Zero Precision)
Updated: 5/25/2017 (1 day ago)
Anderson's Optic Ready Carbine is chambered in .223/5.56 comes with a 16'' Chrome Moly Vanadium Steel M4 Contour Barrel 1-8 twist , Forged Receivers, A2 Hand Guard, M4 style 6 position Butt Stock, A2 pistol grip, A2 Flash Hider, Andersons Trigger and Hammer, Standard Charging Handle, one thirty round magazine. All receivers, charging handles and buffer tubes are 7075 T6.
Current Deal
420 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament Billet Fifteen AR-15 Builders Set Limited Edition, Battleworn Noveske Green - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $472.89 (Ground Zero Precision)
Updated: 5/22/2017 (4 days ago)
This custom AR-15 builders set is like none you've ever seen before! Starting with the new Next Level Armament Billet Fifteen ultra light weight AR-15 receiver set and free-float handguard and finished in a beautiful battleworn Noveske Green cerakote by Ground Zero Coatings this set is sure to turn some heads. The NLX15 billet receiver set weighs in at just 15 ounces putting it among the very lightest available today! That's just under a pound for both upper and lower combined.
Current Deal
263 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Tactical/ Sporting Rifle AR15 1:8 15" KeyMod TAC-15B NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $405.45 (Ground Zero Precision)
Added: 5/18/2017 (8 days ago)
RECEIVERS Anderson Manufacturing Forged Mil-Spec 7075-T6 Aluminum AR-15 Upper & Lower Receiver Set - Type III Class II Hard Coat Anodized - Black BARREL 16" M4 Profile 4150 Chromoly Barrel, Black Parkerized Finish, .223 / 5.56 Wylde Chambered, 1:8 Twist BCG Ground Zero Precision Dead Bolt +P Gen II Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested GAS SYSTEM Carbine Length Direct Impingement; Low Profile Non-Adjustable Steel Gas Block; Seamless Stainless Steel Gas Tube TRIGGER G.I. Trigger MUZZLE DEVICE A2 Birdcage Muzzle Device FURNITURE G.I. A2 Grip & Trinity Force Alpha 6-Position Adjustable Buttstock HANDGUARD 15" TAC-HUNTER Gen 2 Mod 1 KEYMOD Free Float Hand Guard - 7075-T6 Aluminum - Type III Class II Hard Coat Anodized - Black CALIBER .223 / 5.56 Wylde LENGTH / WT 32.5" / 6lbs 6oz.
Current Deal
129 views | 0 Comments | E-Mail Deal


Deal Image AR-15 A4 Semi-Auto M16 Special Purpose Rifle Clone - Limited Edition - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $615.15 (Ground Zero Precision)
Updated: 5/18/2017 (8 days ago)
Model AR-15 A4 semi-automatic rifle chambered for .223 / 5.56 (Wylde) with 20" barrel. This model has a black/gray A2-style stock, black A2-style handguards and all metal components finished in black. It comes with a detachable carry handle and a steel USGI 30-round magazine. This AR-15 A4 offers many standard and new features that gun owners will enjoy. The perfect gift for veterans or anyone else wanting to experience the look, feel and performance of a U. S. military standard issue M16 in a semi-auto format. Limited Edition of 50 KEY FEATURES Matched Anderson Rifles Upper & Lower Receiver Set - Forged 7075 T6 Aluminum to Exact Mil-Spec Dimensions - Hard Coat Anodized (Black) Type III Class II to MIL-A-8625 20-inch 4150 Chrome Moly Vanadium Barrel, HBAR profile, Rifle Gas System, Button-broached,1:9 RH Twist Colt Rifle Length Mil-Spec A2 Handguards with Aluminum Heat Shield Colt Mil-Spec Stock Assembly - Dark Gray/Black Nitride Enhanced Mil-Spec Lower Parts Kit Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Carrier: 8620 Steel, Black Phosphate finish, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo, Bolt: 158 Carpenter Steel, Magnetic Particle Inspected, High Pressure Tested, Black Phosphate Finish, Gas Key: 4041 Steel, Grade 8 Fasteners, Staked to Mil-Spec Mil-Spec A2 Steel Flash Hider & Crush Washer - Salt Bath QPQ Nitride Finish Correct Height Railed Gas Block Weight: 7.8 lbs. Overall Length: 39.5 inches Barrel Length: 20 inches Removable A2 Carry Handle with Built-In Rear Sight Includes Mil-Spec Steel USGI 30 Round Magazine
Current Deal
811 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Tactical/Sporting Rifle AR-15 .223/5.56 Wylde 1:8 12" KeyMod TAC-12B - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $387.45 (Ground Zero Precision)
Added: 5/18/2017 (8 days ago)
RECEIVERS Anderson Manufacturing Forged Mil-Spec 7075-T6 Aluminum AR-15 Upper & Lower Receiver Set - Type III Class II Hard Coat Anodized - Black BARREL 16" M4 Profile 4150 Chromoly Barrel, Black Parkerized Finish, .223 / 5.56 Wylde Chambered, 1:8 Twist BCG Ground Zero Precision Dead Bolt +P Gen II Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested GAS SYSTEM Carbine Length Direct Impingement; Low Profile Non-Adjustable Steel Gas Block; Seamless Stainless Steel Gas Tube TRIGGER G.I. Trigger MUZZLE DEVICE A2 Birdcage Muzzle Device FURNITURE G.I. A2 Grip & Trinity Force Alpha 6-Position Adjustable Buttstock HANDGUARD 12" TAC-HUNTER Gen 2 Mod 1 KEYMOD Free Float Hand Guard - 7075-T6 Aluminum - Type III Class II Hard Coat Anodized - Black CALIBER .223 / 5.56 Wylde LENGTH / WT 32.5" / 6lbs 3oz.
Current Deal
154 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision X15 Stripped AR-15 Lower Receiver, GEN 2 - $55.00 (Ground Zero Precision)
Added: 5/14/2017 (12 days ago)
Aero Precision's Gen 2 X15 stripped AR-15 lower receiver is the perfect base for your custom AR-15 build. Machined to mil-spec dimensions, these lowers work with standard AR-15 components and ensure the highest quality with a correct component interface.
Current Deal
118 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision STS GEN 2 Stripped AR-15 Lower Receiver - Anodized Black - $70.00 (Ground Zero Precision)
Added: 5/14/2017 (12 days ago)
The STS (Short Throw Safety) AR-15 Stripped Lower Receiver by Aero Precision is the perfect lower to start your build. Custom designed markings accept short-throw safety selectors while maintaining mil-spec dimensions and correct component interface. Selector markings will work with 45, 60 or 90 degree safety selectors. STS lowers are marked and milled to accept short-throw safety selectors, but will work with standard selectors as well! Includes: Stripped AR15 Lower Receiver, STS Features: Caliber Marked: MULTI Forged Mil-Spec 7075-T6 Aerospace Grade Aluminum Black Hardcoat Anodized to MIL-A-8625F, Type 3, Class 2
Current Deal
111 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision AR-15 Gen 2 Stripped Lower Receiver - TEXAS Special Edition - $70.00 (Ground Zero Precision)
Updated: 5/14/2017 (12 days ago)
This Special Edition AR15 Lower Receiver is dedicated to the great state of Texas. Nicknamed the Lone Star State, the star serves as a reminder of the states struggle for independence from Mexico. This custom design is showcased on our Gen 2 AR15 Lower Receiver, cutting all the way through the magwell of the receiver. Custom TEXAS engravings and a TX serial number designation make this a truely unique base for your next build. LOWER FEATURES Star cut all the way through the magwell of the lower receiver Custom MOD TEXAS engraving Custom serial number designation (Example: TX0001) Gen 2 Aero Precision Lower Receiver with Flared Magwell and Upper Tension Screw
Current Deal
457 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision AR-15 Gen 2 Stripped Lower Receiver - Special Edition: PEW PEW PEW - $70.00 (Ground Zero Precision)
Updated: 5/14/2017 (12 days ago)
Aero Precision's Special Edition: PEW AR15 Stripped Gen 2 Lower Receiver features custom "PEW PEW PEW" and "NO PEW" safety selector markings on our popular AR15 lower platform. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface. Includes: Stripped AR15 Gen 2 Lower Receiver, Special Edition: PEW Hardcoat Anodized - Black
Current Deal
541 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision AR-15 Gen 2 Stripped Lower Receiver - Limited Edition: M16A4 - $77.49 (Ground Zero Precision)
Added: 5/13/2017 (13 days ago)
Aero Precision's M16A4 Special Edition Lower Receiver features custom engraving on their AR-15 Gen 2 Lower Receiver and is the perfect base for your M16A4 clone build. Features:Custom Aero Precision logo. Markings include: Property of U.S.A., MOD M16A4, CAL. 5.56MM Serial number designation. Safe/Semi/Burst safety selector markings.
Current Deal
169 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 7.5" Free-Floated KEYMOD .223/5.56 AR-15 Upper Receiver - No BCG, No Charging Handle - $195.49 (Ground Zero Precision)
Added: 5/11/2017 (15 days ago)
Barrel Specifications:Length Additional Components and Specifications: 1/2 X 28 "Bird Cage" Flash Suppressor - Salt Bath QPQ Nitride Finish Seamless Stainless Steel Pistol Length Gas Tube Mod 1 .750 Steel Micro Gas Block - Phosphate Finish (Black) 7.5"Material 4150 Chrome Moly VanadiumProfile ModernFinish Corrosion Resistant Parkerized - BlackGas System Length PistolGas Block Journal .750"Twist Rate 1:9Muzzle 1/2 X 28 ThreadedWeight 10 oz Upper Receiver Materials and Specifications: Manufactured to U. S. Mil-Spec Forged 7075 T-6 Aluminum M4 Upper Receiver with M4 Feed Ramps 1913 Picatinny Rail Flat Top Multi-Caliber Capable Hard Coat Anodize Type III Class II to MIL-A-8625 Matte Black Finish Mil-Spec Ejection Port Cover Mil-Spec Ejection Port Hinge Pin MIl-Spec Ejection Port Hinge Pin C-clip Mil-Spec Ejection Port Spring MIl-Spec "Target" Forward Assist - Salt Bath QPQ Nitride Finish Mil-Spec Forward Assist Spring
Current Deal
143 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 7.5" Free-Floated KEYMOD 300 Blackout AR15 Upper Receiver - No BCG, No Charging Handle - $199.95 (Ground Zero Precision)
Updated: 5/11/2017 (15 days ago)
Building your own custom free floated AR15 300 Blackout Pistol is a snap when you have all of the right parts. It's even easier when someone has already done the legwork to source all of the components, made sure they are of the highest quality and fit, BUILDS AND TESTS THE UPPER RECEIVER and then put them all into a nice little package for you.
Current Deal
1132 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 16" A4 AR15 Upper Receiver w/ Pop-Up BUIS w/BCG And CH - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $314.55 (Ground Zero Precision)
Updated: 5/10/2017 (16 days ago)
Includes all of the following:Ground Zero Precision A4 Flat-Top 7075-T6 Aluminum Upper Receiver16" Parkerized Govt. Profile .223/5.56 Chambered, 1:7 twist Carbine BarrelGround Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected High Pressure Tested Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Sight Set (Front & Rear) Ground Zero Precision Mod 3 .750 Rail Height Railed Gas Block Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2-28 Flash Hider with Crush Washer Mil-Spec 7075-T6 Aluminum Charging Handle Dust Cover Door Assembly with Pin, C-Clip and Spring Target Forward Assist with Spring and Roll Pin A2 Style Carbine Length Hand Guards with Aluminum Heat Shielding A2 Style Round Hand Guard Cap A2 Barrel Nut - Standard AR-15 A2 Delta Ring Weldon Spring Snap Ring
Current Deal
799 views | 0 Comments | E-Mail Deal


Deal Image Anderson Built AR-15 Upper / Lower Combo Set w/ Dead Bolt BCG & Charging Handle NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $193.95 (Ground Zero Precision)
Updated: 5/10/2017 (16 days ago)
Anderson AR-15 Upper Receiver with Parts Kit (INSTALLED), Dead Bolt Gen II +P Premium AR-15 / M16 Bolt Carrier Group, Ground Zero Precision Mil-Spec AR-15 Charging Handle!
Current Deal
379 views | 0 Comments | E-Mail Deal


Deal Image Anderson Manufacturing AR-15 Pistol Lower Kit NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $106.65 (Ground Zero Precision)
Updated: 5/10/2017 (16 days ago)
Lower Receiver: AR-15 Lower Receiver, Marked: Multi Cal. Lower Parts Kit: Fits all Mil-Spec stripped AR-15 lower receivers. Pistol Buffer Tube Kit: This pistol buffer tube is precision machined on the latest CNC machinery from a 7075 T6 billet aircraft aluminum blank and finished with rugged matte black Type III anodizing.
Current Deal
384 views | 1 Comment | E-Mail Deal


Deal Image Nitride Enhanced Mil-Spec AR15 Lower Parts Kit - $4.50 Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $35.96 (Ground Zero Precision)
Updated: 5/8/2017 (18 days ago)
This kit includes all of the following: A2 Style Pistol Grip with Checkering, Deeply Grooved Back Strap and Finger Ledge Mil-Spec Trigger Standard Weight Trigger Spring Mil-Spec Hammer - Heavy Heavy Power Hammer Spring Steel Dis-connector Dis-connector Spring Steel Trigger Pin - Nitride Finish X2 Flat Mil-Spec Trigger Guard Steel Trigger Guard Roll Pin/Coil Steel Takedown Pin - Nitride Finish Steel Pivot Pin - Nitride Finish Takedown/Pivot Pin Detent X2 Takedown/Pivot Pin Detent Spring X2 Steel Selector/Safety Switch - Nitride Finish Selector/Safety Detent Selector/Safety Detent Spring Buffer Retaining Detent - Nitride Finish Buffer Retaining Detent Spring Steel Bolt Release - Nitride Finish Steel Bolt Release Plunger - Nitride Finish Bolt Release Plunger Spring Steel Bolt Release Roll Pin/Coil Steel Magazine Catch - Nitride Finish Magazine Catch Spring Steel Magazine Release Button - Nitride Finish
Current Deal
1506 views | 1 Comment | E-Mail Deal


Deal Image 16" Complete AR15 5.56 Upper Receiver with Tac-Hunter Keymod Rail and Dead Bolt Premium Full-Mass Gen II BCG - Free Shipping! NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $351.99 (Ground Zero Precision)
Updated: 5/8/2017 (18 days ago)
Strong, Reliable, Rock Solid Performance. Shot after shot. Built for duty under the most extreme conditions with zero corners cut. With it's beautiful black phosphate finish light contour series .223 / 5.56 Wylde barrel nestled under our 15" Tac-Hunter Mod 2 KEYMOD modular rail this complete upper receiver a sight to behold. Form meets function. A true beast veiled in beauty. With the push of two pins you can convert your boring, ho-hum rifle into a true tack driving masterpiece capable firing both .223 and 5.56 ammunition without losing accuracy between calibers.
Current Deal
755 views | 2 Comments | E-Mail Deal


Deal Image LUTH-AR MBA-1 Fully Adjustable Precision AR Rifle Stock - Black - $130.49 (Ground Zero Precision)
Updated: 5/7/2017 (19 days ago)
The MBA-1 or Modular Buttstock Assembly by LUTH-AR is not only the most affordable fully adjustable precision buttstock for AR platform rifles on the market today; it's also one of the best!
Current Deal
856 views | 0 Comments | E-Mail Deal


Deal Image DIY 16" Parkerized .223 / 5.56 AR15 / M4 Upper Receiver Project Kit (16P1) - Free Shipping! - $319.94 (Ground Zero Precision)
Updated: 5/7/2017 (19 days ago)
This build kit includes all of the following high-quality parts: 16" Parkerized M4 .223 / 556 chambered barrel, 1:7 twist Ground Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aluminum Stripped Upper Receiver Ground Zero Precision Mod 1 .750 Micro Gas Block Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2x28 Flash Hider with Crush Washer Mil-Spec Charging Handle Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin
Current Deal
1295 views | 1 Comment | E-Mail Deal


Deal Image Dead Bolt GEN II +P Premium AR-15 / M16 Bolt Carrier Group - $7.50 Flat Rate Shipping! - $75.00 (Ground Zero Precision)
Updated: 5/6/2017 (20 days ago)
This complete bolt carrier group is a perfect upgrade for any AR15 or M16 platform .223 / 5.56 or 300 Blackout pistol or rifle and is completely legal in all 50 states.
Current Deal
721 views | 0 Comments | E-Mail Deal


Deal Image DIY 16" .223 / 5.56 Carbine AR15 Project Kit with TF Alpha Stock (3P) - Free Shipping! - $355.49 (Ground Zero Precision)
Updated: 5/6/2017 (20 days ago)
This project kit includes all of the following high-quality parts: 16" Modern Contour Profile .223 / 5.56 Wylde Chambered, 1:8 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black) Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil Spec Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Mil-Spec 7075-T7 Aluminum Buffer Tube - Black Hard Coat Anodized (Black) to Mil-A-8625 "Slick Kote" Carbine Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
2635 views | 1 Comment | E-Mail Deal


Deal Image Anderson Manufacturing Stripped AR-15 Lower Receiver - $42.49 (Ground Zero Precision)
Updated: 5/6/2017 (20 days ago)
Stripped, Semi-Auto, Lower Receiver delivering custom shop quality without the typical custom shop price. The perfect platform to start your ultimate, mission-specific, AR-15 rifle, carbine or pistol.
Current Deal
240 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX556 Elite Series AR15 Matched Receiver Set Multi-Cal - $205.00 (Ground Zero Precision)
Updated: 5/6/2017 (20 days ago)
Introducing the all new ELITE matched upper and lower receiver set from Next Level Armament delivering all of the sexy of billet in a forging without the high price of Billet machining. Precision machined from aerospace grade 7075 T-6 aluminum forgings.
Current Deal
609 views | 0 Comments | E-Mail Deal


Deal Image Dead Bolt GEN II +P Premium Nickel Boron AR-15 / M16 Bolt Carrier Group - $7.50 Shipping! - $107.49 (Ground Zero Precision)
Updated: 5/5/2017 (21 days ago)
This complete bolt carrier group is a perfect upgrade for any AR15 or M16 platform .223 / 5.56 or 300 Blackout pistol or rifle and is completely legal in all 50 states.
Current Deal
711 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 16" Free Floated Ballistic Advantage 300 Blackout Complete AR-15 Keymod Upper Receiver With SLR Adjustable Gas, Phosphate Bolt Carrier (Nickel Boron Extra) and Charging Handle (BA16TH153A) - Free Shipping! - $615.00 (Ground Zero Precision)
Updated: 5/3/2017 (23 days ago)
As Featured in NRA American Rifleman Magazine - https://www.americanrifleman.org/articles/2016/10/28/three-awesome-ar-uppers/ Includes all of the following (Assembled): Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ballistic Advantage 16" Modern Profile 300 Blackout Barrel - 4150 CrMoV Steel, QPQ Nitride Finish, Magnetic Partical Inspected, High Pressure Tested - Pistol Gas 1:7 Twist, 5R OPTION 1: Ground Zero Precision Dead Bolt Gen II Premium Full-Mass Bolt Carrier Group - Carrier: 8620 Steel, Black Phosphate finish, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo, Bolt: 158 Carpenter Steel, Magnetic Particle Inspected, High Pressure Tested, Black Phosphate Finish, Gas Key: 4041 Steel, Grade 8 Fasteners, Staked to Mil-Spec OPTION 2: Ground Zero Precision Dead Bolt Gen II Premium Full-Mass Bolt Carrier Group - Carrier: 8620 Steel, Nickel Boron Finish, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo, Bolt: 158 Carpenter Steel, Magnetic Particle Inspected, High Pressure Tested, Nickel Boron Finish, Gas Key: 4041 Steel, Grade 8 Fasteners, Staked to Mil-Spec SLR Rifleworks Sentry 7 Adjustable Micro Gas Block - .750 Dia., 4140 Steel Block with 4140 Nexturn Swiss Metering Screw, QPQ Salt Bath Nitride Finish - Black Seemless Stainless Pistol Length Gas Tube with Roll Pin Ground Zero Precision 15" Tac-Hunter Keymod Free Float Handguard - 7075 T-6 Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 A2 "Birdcage" 5/8 X 24 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Enhanced Mil-Spec 6-Position Carbine Buffer Tube - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin
Current Deal
622 views | 0 Comments | E-Mail Deal


Deal Image Strike Industries Checkmate Comp for .223 / 5.56 - $39.95 (Ground Zero Precision)
Updated: 5/2/2017 (24 days ago)
The Check mate top quality, multi-functional muzzle instrument that is designed with a series of four offset serrated angled prongs which stabilize climb and recoil as well as reduce flash. The top port set to the right, benefits right hand shooters with minimizing excessive climb.
Current Deal
1013 views | 0 Comments | E-Mail Deal


Deal Image Strike Industries Sidewinder BUIS Back Up Iron Sights, Left or Right 45 Degree or Co-Witness - $139.95 (Ground Zero Precision)
Updated: 5/1/2017 (25 days ago)
The SI-Sidewinder is a backup iron sight set that offers unprecedented flexibility. In one low profile package, the Sidewinder offers the on the go option for Left or Right 45 degree offset or traditional in line capabilities. Whether you are in need of a low profile, low snag inline backup for your red dot, or a short range, offset CQB sight backup for magnified optics, the Sidewinder can fill your needs. The low profile SI-Ambush mounting system can clear even the largest of optics and the offset sight means instant access to your back up iron sights without removing your optic. The SI-Sidewinder is a jack of all trades iron sight without compromise.
Current Deal
316 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 16" Ballistic Advantage 300 Blackout Complete AR15 Upper Receiver with 15" UTG-PRO Super Slim Keymod Free-Float Handguard, w/Bolt Carrier Group & Charging Handle - Free Shipping! - $544.31 (Ground Zero Precision)
Updated: 4/26/2017 (1 month ago)
Strong, Reliable, Rock Solid Performance. Shot after shot. Built for duty under the most extreme conditions with zero corners cut. With it's beautiful Ballistic Advantage QPQ nitrided modern series barrel nestled under the insanely popular 15" Super Slim Keymod modular rail system by UTG-PRO this complete upper receiver a sight to behold. Form meets function. A true beast veiled in beauty.
Current Deal
401 views | 0 Comments | E-Mail Deal


Deal Image LUTH-AR MBA-3 Fully Adjustable Carbine AR Stock - Black NOTE: Use Coupon Code GETUSOME To Get This Price! - $134.96 (Ground Zero Precision)
Updated: 4/24/2017 (1 month ago)
This stock pairs perfectly with carbine AR rifles and allows shooters to have full adjustability. Not only is it the lightest and most affordable fully adjustable stock on the market, but it includes many stand-out features that are completely absent in all other stocks.
Current Deal
629 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Stripped AR-15 Upper Receiver NOTE: Use Coupon Code GETUSOME To Get This Price! - $35.96 (Ground Zero Precision)
Updated: 4/24/2017 (1 month ago)
Ground Zero Precision upper receivers are manufactured for us in the United States by a major military and NASA contract to U. S. Military Specification. Forged from 7075 T-6 Aluminum and hard coat type III class III anodized in matte black for durability and reliability in the most extreme of environments. Manufactured to U. S. Mil-Spec Forged 7075 T-6 Aluminum M-4 Upper Receiver with M-4 Feed Ramps 1913 Picatinny Rail Flat Top Multi-Caliber Capable Hard Coat Anodize Type III Class II Matte Black Finish
Current Deal
3359 views | 4 Comments | E-Mail Deal


Deal Image Next Level Armament NLX308 Billet Stripped Upper Receiver, 7075 Aerospace Alloy Aluminum - $220.00 (Ground Zero Precision)
Updated: 4/20/2017 (1 month ago)
Next Level Armament NLX308 upper receivers start with U. S. Milled 7075 Aerospace Alloy Aluminum Billet Blank. Each is precision saw cut to length on a Programmable CNC Marvel Saw. Lathe operations are performed on ultra-high precision live tooling Mazak Machines and are then transferred to Haas SS Precision CNC Milling Machines. Each step of the way is carefully monitored through precision Touch Probes for the most exact and precise machining available anywhere in the world today. After machining, the NLX308 Upper Receivers are given a tough hard coat anodized finish.
Current Deal
605 views | 2 Comments | E-Mail Deal


Deal Image GZP-10.5" A4 Stainless Complete 5.56/.223 Upper Receiver With Dead Bolt +P Gen II BCG, Charging Handle & Pop-Up BUIS - Free Shipping! - $382.49 (Ground Zero Precision)
Updated: 4/20/2017 (1 month ago)
Includes all of the following: Ground Zero Precision A4 Flat-Top 7075-T6 Aluminum Upper Receiver 10.5" Stainless Govt. Profile .223/5.56 "Wylde" Chambered, 1:8 twist, Carbine Gas Barrel Ground Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Sight Set (Front & Rear) Ground Zero Precision Mod 3 .750 Rail Height Railed Gas Block Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2-28 Flash Hider with Crush Washer Mil-Spec 7075-T6 Aluminum Charging Handle Dust Cover Door Assembly with Pin, C-Clip and Spring Target Forward Assist with Spring and Roll Pin A2 Style Carbine Length Hand Guards with Aluminum Heat Shielding A2 Style Round Hand Guard Cap A2 Barrel Nut - Standard AR-15 A2 Delta Ring Weldon Spring Snap Ring
Current Deal
922 views | 0 Comments | E-Mail Deal


Deal Image Dead Bolt Ultra-Light Weight Competition AR-15 Bolt Carrier Group - QPQ Nitride & Nickel Boron - $225.85 (Ground Zero Precision)
Added: 4/20/2017 (1 month ago)
We designed our Dead Bolt ultra-light weight competition grade AR-15 bolt carrier group to be among the lightest on the market without compromising strength or functionality. Engineered for speed, dependability and weighing in at a mere 8.9 ounces complete this bolt carrier group exceeds all of its peers in material specification, finish and balance. It's also as beautiful as it is functional.
Current Deal
145 views | 0 Comments | E-Mail Deal


Deal Image Rise Armament RA-140 Super Sporting Drop-In AR Target Trigger (SST) - Free Shipping! - $122.00 (Ground Zero Precision)
Updated: 4/18/2017 (1 month ago)
Rise Armament's "Black Fallout" RA-140 precision drop-in AR trigger is a high-performing, easy to install, easy to maintain, single-stage, cost-effective AR rifle/pistol upgrade. A perfect replacement for gritty, heavy mil-spec AR triggers.
Current Deal
1299 views | 2 Comments | E-Mail Deal


Deal Image Quick Build .223 / 5.56 AR-15 Kit with Complete 12" KEYMOD Free-Floated Upper Receiver (QB-TF12P) - Free Shipping! - $587.31 (Ground Zero Precision)
Updated: 4/16/2017 (1 month ago)
This build kit includes all of the following high-quality parts: 16" Modern Contour Profile .223 / 5.56 Wylde Chambered, 1:8 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black) Ground Zero Precision Dead Bolt +P Gen II Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 12" Trinity Force P1812 KEYMOD Free Float Hand Guard with Barrel nut Two (2) Low Profile Keymod Rail Sections - One 3, one 2" Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28" Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Nitride Enhanced Mil-Spec Lower Parts Kit "Slick-Kote" Carbine Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
446 views | 0 Comments | E-Mail Deal


Deal Image 7.5" 300 Blackout AR15 Upper Receiver w/ 4" Free Float Hand Guard & Sights - Includes BCG & CH 75P300-B4TPU - Free Shipping! - $378.09 (Ground Zero Precision)
Updated: 4/15/2017 (1 month ago)
Includes all of the following (Assembled): Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 7.5" Modern Profile AAC 300 Blackout Chambered, 1:7 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black) Ground Zero Precision Dead Bolt +P Gen II Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision Mod 2 .750 Same Plane Rail Height Railed Gas Block Seemless Stainless Pistol Length Gas Tube with Roll Pin A2 "Birdcage" 5/8 X 24 Flash Hider with Crush Washer - QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Ejection Port Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec "Target" Forward Assist with Spring and Roll Pin - QPQ Nitride Finish Ground Zero Precision 4" Knurled Free Float Tube 7075 T-6 Aluminum, Hard Coat Black Anodized Finish Ground Zero Precision Polymer Pop-Up Front & Rear BUIS
Current Deal
1619 views | 1 Comment | E-Mail Deal


Deal Image DIY 16" .223 / 5.56 AR-15 Project Kit With KEYMOD Free-Float Handguard (5P) - Free Shipping! - $398.49 (Ground Zero Precision)
Added: 4/12/2017 (1 month ago)
This build kit includes all of the following high-quality parts:16" Modern Contour Profile .223 / 5.56 Wylde Chambered, 1:8 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black)Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 10" GZP-TAC-HUNTER-10 Gen 2 Mod 1 KEYMOD Free Float Hand Guard with Barrel nut Mil-Spec M4 6-Position Carbine Patrol Stock (Black) Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black "Slick-Kote" Carbine Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
195 views | 0 Comments | E-Mail Deal


Deal Image Enhanced Parts Kit for DPMS Profile AR .308 Lower Receivers, A2 Grip - $79.95 (Ground Zero Precision)
Added: 4/8/2017 (2 months ago)
This kit includes all of the following: Extended .308 Pivot Pin - Black Phosphate Finish Pivot Pin Detent Pivot Pin Spring Extended .308 Takedown Pin - Black Phosphate Finish Takedown Pin Detent Takedown Pin Spring Magazine Catch Next Level Armament Extended Mag Release Button Magazine Catch Spring Safety - Selector Switch - Black Nitride Finish Selector Switch Detent Selector Detent Spring Buffer Retaining Detent Buffer Retaining Detent Spring A2 Style Pistol Grip with Checkering, Deeply Grooved Back Strap and Finger Ledge Pistol Grip Screw Pistol Grip Lock Washer Standard Trigger Guard Trigger Guard Roll Pin Mil-Spec Hammer - Black Nitride Finish Heavy Hi-Power Hammer Spring Steel Hammer Pin - Black Nitride Finish Mil-Spec Trigger - Black Nitride Finish Standard Weight Trigger Spring Steel Trigger Pin - Black Nitride Finish Steel Dis-connector, Dis-connector Spring .308 Specific Heavy Duty Bolt Catch - Black Nitride Finish Bolt Catch Buffer - Black Nitride Finish Bolt Catch Spring Bolt Catch Screw - Stainless Steel (May be single or two piece)
Current Deal
162 views | 0 Comments | E-Mail Deal


Deal Image DIY 16" Ballistic Advantage 300 Blackout Project Kit With Enhanced Alpha Stock (3BA) - Free Shipping! - $489.08 (Ground Zero Precision)
Updated: 4/8/2017 (2 months ago)
This build kit includes all of the following high-quality parts: Ballistic Advantage 16" Modern Profile 300 Blackout Barrel - QPQ Nitride Finish - Pistol Gas 1:7 Twist Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Pistol Length Gas Tube with Roll Pin A2 "Birdcage" 5/8 X 24 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Mil-Spec (Enhanced) 7075 T-7 6-Position Buffer Tube (Carbine) "Slick-Kote" Carbine Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
757 views | 3 Comments | E-Mail Deal


Deal Image Ground Zero Precision 7.5" Free-Floated KEYMOD .223 / 5.56 AR-15 Upper Receiver w/BCG And CH - Magpul FDE - Free Shipping! - $330.17 (Ground Zero Precision)
Updated: 4/6/2017 (2 months ago)
Ground Zero Precision 7.5" Free-Floated KEYMOD .223 / 5.56 AR-15 Upper Receiver w/BCG And CH - Magpul FDE
Current Deal
599 views | 0 Comments | E-Mail Deal


Deal Image Elftmann ELF LR308 / AR-10 .308 Precision Drop-In Trigger - $255.99 (Ground Zero Precision)
Updated: 4/6/2017 (2 months ago)
The ELF Drop-In AR-10 Trigger has been built to withstand the punishment of high powered calibers. The only AR platform trigger using aircraft needle bearings, making for an incredibly smooth and fast trigger pull. The heavy hammer combined with our exclusive .043 double double wound polished piano wire hammer spring ensure full ignition of any ammo including .308 and 7.62x51. Pull weight from 2 3/4lbs to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver.
Current Deal
1153 views | 1 Comment | E-Mail Deal


Deal Image AR15 Lower Receiver Parts Kit 2 with RISE Armament Black Fallout RA-140 (SST) Trigger - $130.49 (Ground Zero Precision)
Updated: 4/4/2017 (2 months ago)
This lower receiver parts kit comes with everything you need to build and complete your stripped AR-15 lower receiver. All parts are made in the U.S.A. to meet or exceed standard military specifications. Kit includes a Black Fallout RA-140 Super Sporting (SST) premium 4 lb drop in trigger.
Current Deal
1301 views | 1 Comment | E-Mail Deal


Deal Image ODIN Works XMR Extended Magazine Release - Black - $18.59 (Ground Zero Precision)
Updated: 3/31/2017 (2 months ago)
A Flagship product for ODIN Works, the XMR (eXtended Magazine Release) is one accessory every AR needs. Machined from billet 6061 aluminum and designed to work with KNS pins. The XMR is 4x larger than a mil spec button making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and AR10 lower receivers. Easy install that takes minutes.
Current Deal
243 views | 0 Comments | E-Mail Deal


Deal Image .30 Cal Low Profile Steel Gas Block, Stainless Carbine Gas Tube, Flash Hider and Crush Washer Combo - 5/8-24 - $4.50 Shipping! - $29.95 (Ground Zero Precision)
Updated: 3/31/2017 (2 months ago)
.30 Cal Low Profile Steel Gas Block, Stainless Carbine Gas Tube, Flash Hider and Crush Washer Combo - 5/8-24 - $3.50 Shipping!
Current Deal
750 views | 0 Comments | E-Mail Deal


Deal Image 7.5" .223 / 5.56 "Wylde" Parkerized AR15 Pistol Barrel - 1:7 Twist - $77.29 (Ground Zero Precision)
Updated: 3/31/2017 (2 months ago)
Our premium .223 Wylde AR-15 barrel is manufactured on state of the art CNC equipment under rigorous ISO 9002 Quality Control Standards. Caliber: .223 Wylde - Accurized .223 / 5.56 Hybrid ChamberLength: 7.5Twist: 1:7Finish: Parkerized Profile: Contour Material: 4140 Steel, Heat Treated to RC 28-32 Hardness, Stress Relieved Feed Ramps: Yes Flutes: No Gas System: Pistol Gas Block Diameter: 0.750 Gas Hole Diameter: 0.076 All NFA/ATF Rules Apply You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Installation of this barrel on a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.
Current Deal
87 views | 0 Comments | E-Mail Deal


Deal Image DIY 16" .223 / 5.56 Carbine AR15 Project Kit (2P) - Free Shipping! - $394.44 (Ground Zero Precision)
Updated: 3/30/2017 (2 months ago)
This build kit includes all of the following high-quality parts: 16" Modern Contour Profile .223 / 5.56 Wylde Chambered, 1:8 Twist Pistol Barrel, 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Fully Parkerized (Black) Ground Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Ejection Port Door Assembly with Pin, C-Clip and Spring Mil-Spec "Target" Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Enhanced Mil-Spec 6-Position Carbine Buffer Tube - 7075 T7 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 "Slick-Kote" Carbine Buffer Spring 3 oz Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
2014 views | 2 Comments | E-Mail Deal


Deal Image Ground Zero Precison 9" Free Floated Ballistic Advantage 300 Blackout Complete AR-15 Keymod Upper Receiver With SLR Adjustable Gas (BA9TH73A) - Free Shipping! - $554.17 (Ground Zero Precision)
Updated: 3/27/2017 (2 months ago)
As featured in NRA's American Rifleman Magazine https://www.americanrifleman.org/articles/2016/11/28/ar-15-pistols-for-home-defense/ This complete 300 Blackout AR-15 pistol upper receiver features a premium 9" Ballistic Advantage barrel, SLR Rifleworks Sentry 7 adjustable gas block and comes with everything you need already installed. Just pop the pins on your pistol or registered SBR AR-15 lower receiver, pop on this upper and you're ready to roll.
Current Deal
364 views | 0 Comments | E-Mail Deal


Deal Image Quad Railed AR Platform Gas Block - .750 - $11.49 (Ground Zero Precision)
Added: 3/27/2017 (2 months ago)
Precision CNC Machined from Aircraft Grade Aluminum Black Matte Hard Coat Anodized Fits All .750" Diameter Barrel Gas Port Stages Accepts Standard Stainless Steel Gas Tubes Easy Installation With No Special Tools Required Includes Roll Pin for Gas Tube and Mounting Hardware
Current Deal
133 views | 0 Comments | E-Mail Deal


Deal Image Quick Build Stainless .223 / 5.56 M4 Style AR15 Kit with Complete Upper & Sights (QB2-A2S) - Free Shipping! - $568.49 (Ground Zero Precision)
Updated: 3/26/2017 (2 months ago)
Just add your stripped lower receiver and mag and you're ready to go. This project kit includes all of the following high-quality parts: 16" Gov't (M4) Profile, .225 / 5.56 Wylde Chambered 1:8 Twist Barrel - Stainless Ground Zero Precision Dead Bolt +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ground Zero Precision Rail Height, Top Railed .750 Gas Block Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Sight Set Seamless Stainless Steel Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Mil-Spec 7075-T7 Aluminum Buffer Tube - Black Hard Coat Anodized Mil-Spec Diameter Enhanced Alpha 6-Position Patrol Stock - Black Ground Zero Precision Heavy Duty Quick Disconnect Sling Swivel "Slick Kote" Buffer Spring Mil-Spec Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate M4 Style Hand Guard M4 Style Delta Ring M4 Style Barrel Nut M4 Style Weldon Spring M4 Style Snap Ring M4 Style Hand Guard Cap (Round)
Current Deal
1296 views | 1 Comment | E-Mail Deal


Deal Image DPMS Rifle Length Fixed A2 AR-15 Stock and Buffer Kit - Gray - $78.49 (Ground Zero Precision)
Added: 3/23/2017 (2 months ago)
This is an exact replica of the classic, fixed length buttstock style developed originally for the U.S. military's M16A2 rifle. Starting with a lightweight, rigid foam core clad in a durable outer shell of tough fiberglass-reinforced polymer this classic stock is perfect for your M16 clone, SPR build or as a replacement for a worn out part. Featuring a hard molded polymer buttplate with aggressive diamond texturing and a diamond textured trapdoor with spring-loaded catch for easy access to internal cleaning kit storage compartment. Includes toe-mounted 1-1/4" sling loop. Kit Includes: DPMS Fixed Length A2 Rifle Stock (Gray) Rifle Buffer Tube - 7075 T6 Aluminum, Hard Coat Anodized (Black) 5.2 oz Standard Length AR-15 Rifle Buffer Standard A2 Rifle Buffer Spring
Current Deal
106 views | 0 Comments | E-Mail Deal


Deal Image Hogue Overmolded Collapsible AR Carbine Milspec Buttstock - Black - $50.96 (Ground Zero Precision)
Updated: 3/23/2017 (2 months ago)
The Hogue OverMolded collapsible buttstock features reinforced polymer construction with a rubber cheek rest and a rubber/polymer hybrid butt pad that provides snag-free rifle shouldering. This unique design creates a snug anti-rattle friction fit that prevents unwanted movement along the buffer tube. . Diameter: Mil-Spec Polymer Component Color: Black Rubber Component Color: Black Compatible with AR-15, LR-308 & AR-10 rifles with mil-spec diameter buffer tubes.
Current Deal
146 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision M4E1 American Flag Cerakote Builder Set, 15" M-LOK/Keymod - Free Shipping! - $499.00 (Ground Zero Precision)
Updated: 3/20/2017 (2 months ago)
Includes:M4E1 Enhanced Upper Receiver finished in American Flag Cerakote. Upper receiver is assembled and includes the forward assist, dust cover and barrel nut.AR15 Gen 2 Stripped Lower Receiver finished in American Flag Cerakote15" Enhanced Gen 2 KeyMod or M-LOK Handguard finished in American Flag Cerakote Billet Trigger Guard in American Flag Cerakote
Current Deal
259 views | 0 Comments | E-Mail Deal


Deal Image DIY 16" Stainless .223 / 5.56 AR15 Carbine Complete Upper Receiver w/ Sights (16S2) - Free Shipping! - $371.12 (Ground Zero Precision)
Updated: 3/19/2017 (2 months ago)
This build kit includes all of the following high-quality parts: 16" Stainless Govt. Profile .223 / 5.56 Wylde Chambered, 1:8 Twist Carbine Barrel Ground Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075-T6 Aluminum Stripped Upper Receiver Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Sight Set (Front & Rear) Ground Zero Precision Mod 3 .750 Rail Height Railed Gas Block Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2-28 Flash Hider with Crush Washer Mil-Spec 7075-T6 Aluminum Charging Handle Dust Cover Door Assembly with Pin, C-Clip and Spring Target Forward Assist with Spring and Roll Pin A2 Style Carbine Length Hand Guards with Aluminum Heat Shielding A2 Style Round Hand Guard Cap A2 Barrel Nut - Standard AR-15 A2 Delta Ring Weldon Spring Snap Ring
Current Deal
1343 views | 2 Comments | E-Mail Deal


Deal Image Rise Armament RA-201 Gen I Striker Billet AR-15 Lower Receiver - FDE - Free Shipping! - $115.00 (Ground Zero Precision)
Updated: 3/15/2017 (2 months ago)
KEY FEATURES: Precision CNC machined from 7075-T6 billet aluminum. Multi caliber marking. Mil-spec component compatible. Magpul Flat Dark Earth Cerakote Finish. Manufactured in RISE Armaments Oklahoma facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements. Backed by RISE Armament's 100% product guarantee and lifetime manufacturing warranty. Designed and made 100% in Broken Arrow, Oklahoma, U.S.A.
Current Deal
151 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision Stripped AR15 Lower Receiver, Gen 2 - FDE Cerakote - $115.00 (Ground Zero Precision)
Updated: 3/15/2017 (2 months ago)
Aero Precision's Gen 2 stripped AR15 lower receiver is the perfect base for your custom AR15 build. Machined to mil-spec dimensions, our lowers work with standard AR15 components and ensure the highest quality with a correct component interface.
Current Deal
457 views | 1 Comment | E-Mail Deal


Deal Image Ground Zero Precision 10.5" Free-Floated KEYMOD .223 / 5.56 AR15 Upper Receiver - No BCG/CH - Free Shipping! - $325.77 (Ground Zero Precision)
Updated: 3/15/2017 (2 months ago)
Ground Zero Precision's Premium .223 / 5.56 "Wylde" chambered 10.5 inch Lightning Series Barrel is precision CNC machined from 4150 Chrome Moly Vanadium steel with a corrosion resistant Parkerized finish and M4 feed ramp extension. Carbine length gas system.
Current Deal
1015 views | 0 Comments | E-Mail Deal


Deal Image DIY 7.5" Stainless .223 / 5.56 AR15 Pistol Project Kit (2S) - Free Shipping! - $350.13 (Ground Zero Precision)
Updated: 3/15/2017 (2 months ago)
This project kit includes all of the following high-quality parts: 7.5" 416R Stainless Steel Govt. Profile .223 / 5.56 Chambered, 1:7 Twist Pistol Barrel Ground Zero Precision Dead Bolt Gen II +P Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested - No Logo Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Parkerized Black Finish Seamless Stainless Pistol Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Pistol Buffer Tube with Comfortable High Density Foam Wrap "Slick Kote" Carbine Buffer Spring 3 oz Carbine Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
810 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX308 MATCHED AR .308 Upper & Lower Receiver Set - Free Shipping! - $490.00 (Ground Zero Precision)
Updated: 3/11/2017 (3 months ago)
The ultimate start for your precision long range AR .308 tack driver! Next Level Armament matched upper & lower receiver set! 7075 aerospace aluminum precision machined to the tightest of tolerances and finished in a beautiful but tough black hard coat anodize to U.S. military specifications.
Current Deal
802 views | 1 Comment | E-Mail Deal


Deal Image Aero Precision M5E1 Enhanced .308 Builder Set w/ Gen 2 12" Keymod Handguard - Black - Free Shipping! - $504.00 (Ground Zero Precision)
Updated: 3/11/2017 (3 months ago)
This Aero Precision builder set package deal features the components you need to start building your own M5E1 (.308) Rifle, including an M5 Lower Receiver, M5E1 Upper Receiver and 12" Gen 2 Keymod Handguard all Anodized Black. Includes: Aero Precision M5 .308 Lower Receiver - Multi-cal Aero Precis
Current Deal
160 views | 0 Comments | E-Mail Deal


Deal Image A2 Style AR-15 Removable Carry Handle With Rear Sight - REJECT/OUT OF SPEC - $15.00 (Ground Zero Precision)
Updated: 3/6/2017 (3 months ago)
OUT OF SPEC - These A2 style AR-15 removable carry handles with rear sight are parts we received from one of our manufacturers that did not meet our specifications for release under our brand. Because they are functional as designed and could be of use we decided to offer them to you here as they are taking up space in our warehouse. They are specifically out of spec with fittment on some upper receivers (loose front to rear, easily fixed with shims) and in construction (cast as opposed to forged).
Current Deal
483 views | 0 Comments | E-Mail Deal


Deal Image Anderson Complete Enhanced AR-15 Lower Receiver w/ Magpul MOE Stock & Grip - Olive Drab NOTE: Use Coupon Code REMEMBER17 To Get This Price! - $190.80 (Ground Zero Precision)
Updated: 3/4/2017 (3 months ago)
Includes: Anderson AM15 Lower Receiver - Anodized Black Magpul MOE Stock - Olive Drab Magpul MOE Grip - Olive Drab Mil-Spec Lower parts kit Mil-Spec Carbine Receiver Extension AR-15 carbine buffer and spring These parts come completely assembled, inspected and ready to go.
Current Deal
165 views | 0 Comments | E-Mail Deal


Deal Image Rise Armament RA-201 Gen I Striker Billet AR-15 Lower Receiver - Free Shipping! - $105.00 (Ground Zero Precision)
Updated: 3/3/2017 (3 months ago)
Designed and engineered for shooters who refuse to settle for anything but the best. Precision CNC machined from aerospace grade 7075 T-6 aluminum, the RISE Armament Striker Billet AR-15 lower receiver has a sleek, streamlined design that emphasizes form as much as function. KEY FEATURES Precision CNC machined from 7075-T6 billet aluminum Multi caliber marking Mil-spec component compatible Includes upper tension screw MIL-A-8625F, Type III, Class 2, hard anodized flat black finish Manufactured in RISE Armament's Oklahoma facility according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirements Backed by RISE Armament's 100% product guarantee and lifetime manufacturing warranty Designed and made 100% in Broken Arrow, Oklahoma, U.S.A.
Current Deal
541 views | 1 Comment | E-Mail Deal


Deal Image Next Level Armament NLX Fifteen Billet AR-15 Receiver Set - $470.00 (Ground Zero Precision)
Updated: 2/24/2017 (3 months ago)
Next Level Armament is getting ready to release their new ultra light weight AR-15 billet receiver set. The NLX15 billet receiver set will weigh just 15 ounces! Thats just under a pound for both upper and lower combined. Next Level Armament designed this receiver set to be as light weight as possible without sacrificing strength by removing material in places that will not effect the integrity of the receiver and without any skeletonized areas aside from the shell deflector. The forward assist has also been moved further forward to allowing left handed shooters more clearance when using ambi charging handles such as the NLX Ambi.
Current Deal
398 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision R.D.S.S. Same Plane BUIS Sight System - $65.49 (Ground Zero Precision)
Updated: 2/19/2017 (3 months ago)
Our Rapid Deployment Sight System (R.D.S.S) features one of the lowest profiles available when folded and quick spring loaded, positive locking deployment with just the push of a button. Front and rear sights lock securely in both the folded and deployed positions and cannot be knocked out of zero even under demanding use. Precision CNC machined from aerospace grade aluminum and hardcoat anodized black to U.S. military specifications (MIL-A-8625). When in the folded position these sights measure a mere .433" from the top of the rail. Rear sight features a setting 300 meters and closer and a second for up to 500 meters. Machined from 7075 T-6 aerospace grade aluminum with steel components Finished in hardcoat anodizing to MIL-A-8625 Crisp .5 MOA click adjustments Easy to install, easy to adjust .433" profile when folded
Current Deal
360 views | 0 Comments | E-Mail Deal


Deal Image Armalite pattern AR-10/AR .308 12.5" Vented Smooth Free-Float Hand Guard for ARMALITE Profile - $50.00 (Ground Zero Precision)
Added: 2/15/2017 (3 months ago)
This 12.5" ultra light weight vented smooth style free float rail designed to perfectly fit ARMALITE profile .308 upper receiver threads. 7075 T6 Aircraft AluminumBead Blasted durable Type III Anodized (black) finishPrecise CNC machined in the United StatesSmooth Grip Surface with heat vent cuts Includes barrel nut Fits all ARMALITE thread pattern AR .308 upper receivers in all calibers Length, 12.5", weight (approx) 15 oz Extremely easy to install Recommended Tools: Wonder Wrench - AR15, AR .308 & AR-10 Armorer's Free-Float Multi-Tool
Current Deal
163 views | 0 Comments | E-Mail Deal


Deal Image Elftmann Tactical ELF Drop-In 3-Gun Competition AR Trigger - Curved - $269.00 (Ground Zero Precision)
Updated: 2/14/2017 (3 months ago)
The Elftmann Tactical ELF Drop-In 3-Gun Trigger has been built for winning competitions. The only AR trigger that employs silky smooth German steel aircraft needle bearings, making for an incredibly smooth and fast trigger pull. The skeletonized hammer combined with our exclusive .043 double double wound polished piano wire hammer spring make for an incredibly fast lock time. Pull weight is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grade aluminum. Installation can be done in minutes using your AR's original hammer and trigger pins. The amazingly short takeup, glass-rod crisp break and next to zero over-travel can be compared to the finest custom 1911 triggers. Adjustability puts you in charge based on your preference. If you are looking for the finest adjustable trigger for your competition AR platform, this is the trigger system for you. Fits any mil-spec AR (Large pin Colt available) Absolutely Drop-Safe regardless of pull-weight Factory set Pull-weight is approximately 50% lighter than that of a standard AR trigger, providing a great combination of speed and accuracy Adjustable from 2 3/4 to 4 lbs pull weight without removing from lower Exclusive double double wound hammer spring and skeletonized hammer ensure a lock time second to none. Very short pull and reset allows for rapid follow up shots and greater accuracy Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel Unique design of disconnect allows full 1/4" width eliminating possibility of wear and double-firing High performance trigger and hammer needle bearings for smoother and faster firing A competition trigger that leaves all others behind 100% made in America with a Lifetime Guarantee!
Current Deal
713 views | 1 Comment | E-Mail Deal


Deal Image Ground Zero Precisions 80% AR-15 Billet Lower Receiver - $64.00 (Ground Zero Precision)
Updated: 2/12/2017 (3 months ago)
This 80% Billet Aluminum AR-15 Receiver is the perfect foundation for your next project. Precision machined from a solid piece of billet aluminum, ensuring maximum precision & material quality. Give your next build a complete custom look and feel with this light-weight precision machined badass. This 80% receiver is 'in the white', unfinished aluminum with a matte tumbled finish. Precision Machined from Aerospace Grade 7075 T-6 Aluminum Billet Blank Will accept standard mil-spec lower parts when completed properly Machined in the USA in an Aerospace Certified manufacturing facility "In The Raw" unfinished aluminum with matte tumble finish - Ready to anodize or cerakote.
Current Deal
617 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX308 Nextride Bolt Carrier Group - $220.00 (Ground Zero Precision)
Added: 2/9/2017 (4 months ago)
Same machining process as the 308 BCG but the Nextride Treatment provides improved function and operation via several key improvements - AMS 2753 specifications - Pyromtery per AMS 2750 - Hardness 52-58 HRc - Improves fatigue strength - Exceptional Lubricity - Low coefficient of friction - Improved Corrosion Resistance - Resistance to weld spatter - Holds dimensional requirements with little or no distortion - Nice matte black color - Metal treatment (not a coating).
Current Deal
176 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX308 Stripped Billet AR-10, LR-308 Lower Receiver - $260.00 (Ground Zero Precision)
Updated: 2/5/2017 (4 months ago)
Precision CNC Machined from 7075 T6 Aluminum Billet Blank, Hardcoat Anodized to U. S. Military Specifications, DPMS Profile. Due to the many and multiple quality control checks required to manufacture upper receivers of this quality Next Level Armament NLX308 Lower Receivers ARE NOT mass manufactured. Please allow up to 2 weeks from the date of your order for your lower receiver to ship to you.
Current Deal
1264 views | 1 Comment | E-Mail Deal


Deal Image Stark Equipment AR-15 Express Fore Grip (SE-5), Black - $29.95 (Ground Zero Precision)
Updated: 2/5/2017 (4 months ago)
Specifically designed for shooters who train and operate with the support hand well forward on the hand guard, fore-end or rails. The further forward you grip your weapon the better able you will be able to manage the recoil. You will also be able to move, or "drive" the gun from target to target or engage a moving target more efficiently.
Current Deal
949 views | 1 Comment | E-Mail Deal


Deal Image Anderson Enhanced AR-15 Complete Precision Rifle Lower Receiver With Magpul PRS Stock and MOE Grip - Free Shipping! - $407.00 (Ground Zero Precision)
Added: 2/2/2017 (4 months ago)
Anderson's Precision AR-15 Complete Lower Receiver is the perfect base for your custom precision AR-15 build. This Enhanced Complete Lower features a Magpul PRS Precision Rifle Stock and MOE pistol grip. Includes: Anderson AM15 Lower Receiver - Anodized Black Magpul PRS Precision Rifle Stock - Black Magpul MOE Pistol Grip - Black Mil-Spec Lower parts kit AR-15 Rifle Buffer and Spring These parts come completely assembled, inspected and ready to go. Ordering from California? Add a Magazine Lock to your order and we will install it for free!
Current Deal
169 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision M5 (.308) B5 BRAVO Complete Lower Receiver - FDE - $389.99 (Ground Zero Precision)
Updated: 1/30/2017 (4 months ago)
Includes:M5 Lower Receiver - Magpul FDE CerakoteB5 Systems BRAVO Stock - BlackB5 Systems P-Grip 23 - BlackM5 .308 Specific Lower Parts KitReceiver Extension.308 Carbine Buffer and SpringThese parts are installed.
Current Deal
372 views | 0 Comments | E-Mail Deal


Deal Image Strike Industries Sail Comp AR-16 Muzzle Break - $49.95 (Ground Zero Precision)
Added: 1/29/2017 (4 months ago)
The Sail Comp packs the performance of larger, heavier devices into a compact, lightweight package. Product Specifications: - Thread Pitch: 1/2"x28 - Bore Diameter: 0.26" - Weight: 3.4 oz - Length: 1.56" - Width: 0.98" Package includes: - 1x SI Sail Comp - 1x Crush Washer Features - Swept baffle shape captures and redirects muzzle gas for improved muzzle control - Compact high efficiency single baffle design - For 5.56 / .223 1/2x28 thread
Current Deal
194 views | 0 Comments | E-Mail Deal


Deal Image Elftmann Tactical Non-Rotating Anti-walk AR Trigger & Hammer Pins - $19.95 (Ground Zero Precision)
Updated: 1/26/2017 (4 months ago)
So easy to install, it takes just seconds to protect your AR15, AR 308 or irreplaceable M16 receiver. Installs by simply clipping master link over protective plate. .154 Diameter Black Oxide FInish
Current Deal
349 views | 0 Comments | E-Mail Deal


Deal Image Strike Industries Viper AR15 Carbine Length Hand Guard - Black - $27.95 (Ground Zero Precision)
Added: 1/22/2017 (4 months ago)
The Strike Industries carbine length VIPER Handguard is a great upgrade to those looking for a solid, slim bottom drop-in handguard with aggressive styling!!! The VIPER Handguard, made of impact resistant nylon fiber-reinforced injection-molded polymer, features aggressive gripping options, top and bottom hand stops and the new M-Lok rail system with plenty of real estate to mount your accessories! Package include - 1x VIPER Handguard (2pcs) Features -Lightweight, impact resistant nylon fiber-reinforced injection-molded polymer - Top and Bottom Hand Stops for multiple gripping options - Aggressive ridges for added dexterity and weapon control - Slim undercarriage for better ergonomics - M-Lok rail system at the 12, 6, 1, and 10 o'clock positions for accessory mounting options!
Current Deal
267 views | 0 Comments | E-Mail Deal


Deal Image Match Grade 18" Stainless, Heavy Profile .223 / 5.56 Wylde AR15 Barrel, 1:8 - Straight Fluted - $142.70 (Ground Zero Precision)
Updated: 1/19/2017 (4 months ago)
This Premium Match Grade barrel is easily capable of shooting sub 1" MOA patterns at 100 yards and beyond when using match grade ammunition and proper shooting technique. Chambered in the popular .223 Wylde, an accurized hybrid chamber capable of firing both .223 and 5.56 ammunition safely and with precision. The heavy profile balances your rifle and aids in precision shooting by helping reduce barrel movement off target and felt recoil. Finished in a beautiful spiral fluted stainless steel your rifle is sure to be as attractive as it is precise. Chambered in 223 Wylde (Fires both .223 & 5.56 safely and with precision) Gas Port 0.085 Gas Length - Mid Gas Block Diameter .750 Barrel Threading 1/2-28 M4 Feed Ramps - Yes Button Profile Rifling 416R Stainless Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved, Deep Cut Straight Fluting 1:8 Twist Manufacturers limited lifetime warranty
Current Deal
521 views | 1 Comment | E-Mail Deal


Deal Image Aero Precision AR15 / M4 Ambidextrous Charging Handle - $78.99 (Ground Zero Precision)
Updated: 1/16/2017 (4 months ago)
The Aero Precision AR15 Ambidextrous Charging Handle features a profound design with left and right side activation levers to charge your firearm from either hand. This rugged handle is made in the USA from 7075-T6 aluminum, anodized black with our laser etched Aero Precision logo. Features: Fully ambidextrous design 7075-T6 Aerospace Grade Aluminum Anodized black Laser engraved Aero Precision logo Made in the USA PLATFORM AR15 WEIGHT 1.92 oz
Current Deal
947 views | 0 Comments | E-Mail Deal


Deal Image Wonder Wrench - AR15, AR .308 & AR-10 Armorer's Free-Float Multi-Tool - $33.99 (Ground Zero Precision)
Updated: 1/6/2017 (5 months ago)
Ground Zero Precision's Wonder Wrench AR15, AR .308 and AR-10 Armorer's Free-Float Multi-Tool is just the thing for installing and adjusting free float barrel nuts, jam nuts for free float rails, flash hiders & muzzle breaks, and includes a cutout for a torque wrench.
Current Deal
337 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Skeletonized KEYMOD Rail Set - $24.95 (Ground Zero Precision)
Added: 1/2/2017 (5 months ago)
Ground Zero Precision skeletonized KEYMOD rail segments are strong, low profile, lightweight and perfect for mounting weapon lights, laser aiming solutions and other accessories requiring a picatinny rail. Low profile segments bring weapon attachments closer to the main body of the weapon, which decreases overall size and bulk. By skeletonizing the underside we've eliminated all the unnecessary bulk and weight from a picatinny rail section and achieved the lightest possible mounting solution for any weapon accessory without sacrificing strength. SPECIFICATIONS Sketletonized for weight and bulk reduction Hard coat anodized Aircraft grade aluminum Low profile KEYMOD attachment points Weight (oz): Set total 1.7, 2" 0.5, 3" 0.7 Lengths: (2) 2" 3 slot, (1) 3.5" 7 slot
Current Deal
183 views | 0 Comments | E-Mail Deal


Deal Image Custom Ultra-Match Ballistic Advantage & Aero Precision 6.5 Creedmoor AR Upper Receiver with Aero Precision Phosphate, Black .308 Bolt Carrier Group - Free Shipping! - $1,055.82 (Ground Zero Precision)
Updated: 1/2/2017 (5 months ago)
This complete custom ultra-match 6.5 mm Creedmoor upper receiver has been designed and purpose built from start to finish for accuracy. Each is hand built by order from the highest quality components available with 16 demanding quality inspections along the way that must be passed before shipment. Absolutely zero inspection failures are allowed. Starting with a 7075 T-6 billet aluminum M5 (.308) stripped upper receiver from Aero Precision and a 22" bead blasted 416R stainless steel match grade Ballistic Advantage barrel this well thought-out upper receiver features a light-weight 16.5" Keymod free-float handguard, an over-sized (scope friendly) 'Scythe' ambidextrous charging handle from Next Level Armament, a hand-built and fitted low profile gas block, a "Tanker" style precision rifle muzzle break and is fully lapped for accuracy. Includes your choice of either Aero Precision's phosphate M5 bolt carrier group or Aero Precision's nickel boron (NiB) bolt carrier group custom coated by FAIL ZERO. Just choose your bolt carrier group by selecting it using the drop-down list above.
Current Deal
1198 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX308 Low-Profile Gas Block - $30.00 (Ground Zero Precision)
Updated: 1/2/2017 (5 months ago)
Next Level Armament's premium low-profile .308 gas block is precision machined from billet tool grade steel. Includes set screws. All parts are beautifully finished in a durable black oxide coat, and laser etched with the Next Level Armament "Gear" logo. Every product manufactured by Next Level Armament and sold by Ground Zero Precision comes with a lifetime warranty against manufacturer defects. Precision machined on new, modern Mazak CNC equipment Premium Tool Grade Steel Durable Black Oxide Coating Lifetime Warranty Against Manufacturer Defects
Current Deal
253 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision Stripped AR15 Upper Receiver - $74.95 (Ground Zero Precision)
Updated: 1/2/2017 (5 months ago)
The AR15 Stripped Upper Receiver is one of our most popular products. Forged from 7075-T6 aluminum, this stripped upper is precision machined to mil-spec M16/M4 specifications and features M4 feedramps. Match this upper with one of our AR15 lower receivers for a solid and dependable fit.
Current Deal
1080 views | 0 Comments | E-Mail Deal


Deal Image Aero Precision M5 (.308) Enhanced Complete Lower Receiver w/ Magpul MOE & STR - FDE Cerakote - $450.00 (Ground Zero Precision)
Added: 12/25/2016 (5 months ago)
Includes: M5 Lower Receiver - Magpul FDE Cerakote, Magpul STR Stock, Magpul MOE Grip, Lower parts kit, Receiver extension,.308 carbine buffer and spring. These parts are installed.
Current Deal
285 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Armorer's Spanner Wrench - $12.94 (Ground Zero Precision)
Updated: 12/22/2016 (5 months ago)
AR-15/M4 and Variant Builder's Toolkit 101: A good armorer's spanner wrench is a must have. Ground Zero Precision's Armorer's Spanner Wrench is the perfect addition to your AR toolkit. Precision machined from high quality 4041 carbon steel, our Armorer's Spanner Wrench provides a castle nut spanner wrench for easily and safely securing your weapon's buffer tube and a perfectly sized wrench for precision tightening and alignment of your flash hider. Precision Machined 4041 Carbon Steel Construction Castle Nut Spanner Wrench Flash Hider Installation and Adjustment Tool Durable Black Nitride Finish High Strength Light Weight Red Rubber Grip
Current Deal
664 views | 0 Comments | E-Mail Deal


Deal Image TTI Firepower PMAG Extension - Black - $46.50 (Ground Zero Precision)
Updated: 12/8/2016 (6 months ago)
TTI Firepower PMAG Magazine Extension, Black Designed to give you the edge over your competition. - Patented, proven push-pin design - Quickly and easily attaches to and detaches from the magazine tube - No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension - One piece design; no small parts to keep track of - Minimal length addition to allow usage while in a prone position - Holds 35+1 rounds on the PMAG30 - Holds 46+1 rounds on the PMAG40 - Adds weight to magazine base to help mags drop free easier for faster reloads - CNC machined from billet aluminum - Hard Anodized - Made in the USA - Reverse compatible with GEN2 PMAG
Current Deal
693 views | 0 Comments | E-Mail Deal


Deal Image Mil-Spec A2 Style AR15 Removable Carry Handle With Rear Sight - Black - $74.97 (Ground Zero Precision)
Updated: 11/18/2016 (6 months ago)
This Mil-Spec height A2 style carry handle is perfect for your flat top AR15, M16A4, M4, M4A1 rifle or carbines. Integrates the convenience of a carry handle with a primary or back-up rear sighting system.
Current Deal
704 views | 0 Comments | E-Mail Deal


Deal Image 18" AR .308 Premium Upper Receiver Project Kit (1) - Free Shipping! - $722.49 (Ground Zero Precision)
Updated: 10/22/2016 (7 months ago)
This build kit includes all of the following high-quality parts: 18" Ballistic Advantage .308 Heavy Profile Rifle Length, Modern Series Barrel, 1:10 Aero Precision M5 .308 / 7.62 Complete Bolt Carrier Group w/ Forward Assist Serrations, 8620 Steel, Mil-Spec Phosphate Coating - Black Aero Precision M5 .308 Assembled Upper Receiver - Hardcoat Anodized Black Ground Zero Precision Steel Mod 1 .750 Micro Gas Block with mounting hardware Seamless Stainless Rifle Length Gas Tube with Roll Pin A2 "Birdcage" 5/8-24 Flash Hider with Crush Washer Mil-Spec .308 Charging Handle
Current Deal
692 views | 0 Comments | E-Mail Deal


Deal Image Next Level Armament NLX223 Scythe Ambi Charging Handle - $75.49 (Ground Zero Precision)
Updated: 10/6/2016 (8 months ago)
The Next Level Armament NLX223 Ambidextrous Charging Handle is precision machined from a single billet blank of 7075 aluminum, features two over-sized "ears" that provide a greater surface area to grab and greater weapon control. Made from 7075 aluminum. Large more aggressive arms for scope clearance and cold weather shooting with gloves. Fewer moving parts than competing designs. Made in the USA by Next Level Armament.
Current Deal
702 views | 1 Comment | E-Mail Deal


Deal Image KAK Shockwave Blade AR-15, AR .308 Pistol Stabilizer - Black - $44.49 (Ground Zero Precision)
Added: 10/2/2016 (8 months ago)
Features: Fits all AR style pistols equipped with a standard pistol buffer tube (up to 1.25 in diameter)AR pattern, LR 308, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in black and flat dark earth (this listing is for black) Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold Made in U.S.A.
Current Deal
292 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision 10.5" Premium 300 Blackout AR15 Barrel - Pistol Gas - $113.49 (Ground Zero Precision)
Updated: 9/16/2016 (8 months ago)
This premium 300 Blackout barrel is manufactured on state of the art CNC equipment under rigorous ISO 9002 Quality Control Standards. From material selection to the first turn of the lathe, to drilling, reaming, rifling, turn, chamber and gas port creation, pinning of the Barrel Extension, drill the gas hole, and mill the flutes, careful attention is paid at each and every step and all features are completed on the latest CNC Equipment. The Barrels are manufactured under the ISO 9002 Quality System, and each barrel goes through a Final Inspection before shipping.
Current Deal
1049 views | 1 Comment | E-Mail Deal


Deal Image Mil-Spec AR15 Charging Handle with Extended Latch - $26.95 (Ground Zero Precision)
Updated: 9/8/2016 (9 months ago)
Our Mil-Spec AR15 Charging Handle with Extended Latch precision CNC machined from billet 7075 T-6 Aluminum and hard coat anodized to military specifications. Featuring a larger, more robust steel grasping surface designed to function with ease in in the most adverse of conditions.
Current Deal
882 views | 0 Comments | E-Mail Deal


Deal Image Elftmann Tactical Push Button Ambidextrous AR Speed Safety - $35.50 (Ground Zero Precision)
Updated: 8/22/2016 (9 months ago)
Take your speed of engagement to a new level! This push button ambidextrous speed safety is the latest innovation from Elftmann Tactical. Quickly take your AR from safety to ready to fire and back to safety with the simple push of a button. With no rotation necessary, no shifting of the shooters hand needed, this is the fastest safety selector to engage and dis-engage on the market. Push Button Safety Design Ambidextrous Operation Extremely Fast On-Off Precision Machined From Gun Quality Tool Steel Durable Black Oxide Finish Compatible With All Mil-Spec Receivers Includes Detent Designed and Manufactured in the United States Lifetime Guarantee
Current Deal
481 views | 0 Comments | E-Mail Deal


Deal Image LUTH-AR MBA-2 "Skullaton" Precision AR Rifle Stock - Black - $47.95 (Ground Zero Precision)
Updated: 8/11/2016 (10 months ago)
The MBA-2 "Skullaton" rifle stock by LUTH-AR is an easy to install, light- weight, highly-ergonomic and fully upgradable replacement for the standard A1/A2 stock!
Current Deal
331 views | 0 Comments | E-Mail Deal


Deal Image 6 Position Mil-Spec Carbine AR15 Buffer Tube - $24.99 (Ground Zero Precision)
Added: 7/24/2016 (10 months ago)
Machined from 7075 T-7 aluminum, this mil-spec buffer tube is the perfect fit for your adjustable carbine buttstock. Six precision-machined notches on the underside provide plenty of options for setting length-of-pull. 7075 T-7 Aluminum 6 Position Buffer Tube Receiver Extension - Hard Coat Anodized to Mil-8625F Type 2 Class 1
Current Deal
228 views | 0 Comments | E-Mail Deal


Deal Image Ground Zero Precision Ultra-Light Polymer Pop-Up BUIS Front and Rear Sight Set - $32.00 (Ground Zero Precision)
Updated: 7/22/2016 (10 months ago)
Light-weight, sturdy, precise and dependable back up sights do not have to break the bank! Ground Zero Precisions sturdy pop-up back up iron sights install in seconds and feature true, quick no tools required field adjustment. Constructed of all metal components sealed and housed in durable injection molded glass-filled polymer, these sights are extreme environment capable and ready for whatever mission you throw at them.
Current Deal
1488 views | 0 Comments | E-Mail Deal


Deal Image DIY 10.5" Stainless .223 / 5.56 AR15 Upper Receiver Project Kit 1C - Free Shipping! - $306.54 (Ground Zero Precision)
Updated: 7/14/2016 (11 months ago)
This build kit includes all of the following high-quality parts: 10.5" Stainless (416R) Modern Contour Profile .223 / 5.56 Wylde Chambered, 1:7 twist Pistol Barrel Ground Zero Precision Premium Full-Mass Bolt Carrier Group - Slick Black Phosphate, Chrome Lined, Magnetic Particle Inspected, High Pressure Tested Ground Zero Precision 7075 T-6 Aerospace Grade Aluminum Stripped Upper Receiver, Hard Coat Anodized (Black) to MIL-A-8625 Ground Zero Precision Mod 1 .750 Stainless Steel Micro Gas Block - Natural Stainless Finish Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 1/2 X 28 Flash Hider with Crush Washer - Salt Bath QPQ Nitride (Black) Finish Mil-Spec Charging Handle - 7075 T-6 Aerospace Grade Aluminum, Hard Coat Anodized (Black) to MIL-A-8625 Mil-Spec Dust Cover Door Assembly with Pin, C-Clip and Spring Mil-Spec Target Forward Assist with Spring and Roll Pin
Current Deal
716 views | 0 Comments | E-Mail Deal


Deal Image DIY 10.5" 300 Blackout Pistol Complete Upper Receiver Kit - FREE SHIPPING - $319.15 (Ground Zero Precision)
Updated: 6/28/2016 (11 months ago)
This build kit includes all of the following high-quality parts: 10.5" Parkerized H-Profile 300 Blackout Chambered, 1/8 twist Pistol Barrel Premium Full-Auto Bolt Carrier Group, Phosphated, Chrome Lined Ground Zero Precision Stripped Upper Receiver Ground Zero Precision Steel, Gas-Nitrided .750 Gas Block Stainless Pistol Length Gas Tube with Roll Pin A2 "Birdcage" 5/8-24 Flash Hider with Crush Washer Mil-Spec Charging Handle Dust Cover Door Assembly with Pin, C-Clip and Spring Target Forward Assist with Spring and Roll Pin
Current Deal
774 views | 0 Comments | E-Mail Deal


Deal Image DIY 10.5" Stainless .223 / 5.56 AR-15 Pistol Project Kit - Free Shipping! - $387.84 (Ground Zero Precision)
Updated: 6/4/2016 (12 months ago)
This build kit includes all of the following high-quality parts: 10.5" Stainless Govt. Profile .223/5.56 Chambered, 1/8 twist Pistol Barrel Premium Full-Auto Bolt Carrier Group, Phosphated, Chrome Lined (Semi-Auto mistakenly Pictured but Full-Auto Included) Ground Zero Precision Stripped Upper Receiver Ground Zero Precision Steel, Gas-Nitrided .750 Gas Block Stainless Carbine Length Gas Tube with Roll Pin A2 "Birdcage" 5/8-24 Flash Hider with Crush Washer Mil-Spec Charging Handle Dust Cover Door Assembly with Pin, C-Clip and Spring Target Forward Assist with Spring and Roll Pin Complete Mil-Spec Lower Parts Kit Pistol Buffer Tube with Comfortable High Density Foam Wrap Buffer Spring H2 Buffer Mil-Spec Castle Nut Mil-Spec End Plate
Current Deal
699 views | 1 Comment | E-Mail Deal


Deal Image 6 Position Complete Mil-Spec AR-15 Buffer Extension Assembly - Carbine - $37.95 (Ground Zero Precision)
Updated: 5/9/2016 (13 months ago)
This Complete AR-15 Carbine Receiver Buffer Extension / Assembly comes with everything you need for your new build or for replacing your original broken/worn out parts. Just add the Mil Spec stock of your choice and you're ready to go.
Current Deal
664 views | 2 Comments | E-Mail Deal



Last Deal Update:
7 hours ago

16,052 Users

Username:
Password:
Remember Me
(forgot user/pass)
(register)
Please visit the Site Sponsors:
KeepShooting.com
Military Shooters, LLC
Ammunition Depot
FullAutoGuns
L.E. Firearms
Stillwood Ammunition Systems
Tactical Vantage
Lucky Gunner
3CR Outdoor Supply
Lax Ammunition


Start an Ad



Contact Me

squeky@gmail.com


Announcements

New to the site? Check out the FAQ to see how it works.

StumbleUpon Toolbar
RSS
Add to Google
Add to Yahoo
Add to My AOL
Valid XHTML 1.0 Transitional