Our premium .223 Wylde AR-15 barrel is manufactured on state of the art CNC equipment under rigorous ISO 9002 Quality Control Standards. Caliber: .223 Wylde - Accurized .223 / 5.56 Hybrid ChamberLength: 7.5Twist: 1:7Finish: Parkerized Profile: Contour Material: 4140 Steel, Heat Treated to RC 28-32 Hardness, Stress Relieved Feed Ramps: Yes Flutes: No Gas System: Pistol Gas Block Diameter: 0.750 Gas Hole Diameter: 0.076 All NFA/ATF Rules Apply You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Installation of this barrel on a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.
BCA Barrels are manufactured from two types of steel. 4150 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved. 416 Stainless Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved. They are Drilled, Reamed, Rifled, Turned, and if Applicable, fluted on CNC Machines. All of these machines are located at 310 McNeill Road, Sanford, NC. All of the machining of the Barrels is completed by BCA. All our Finished Barrels go through a 100% Inspection Process. SKU B300PHB10.517(P) Free Shipping No Length 10.5 Profile Heavy Barrel Twist 1-7 Finish Parkerized Material 4150 Thread Pitch 5/8 x 24 Caliber .300 Blackout Feed Ramp M4 Flutes N/A Gas System Pistol Gas Block System 0.750 Gas Hole Diameter 0.093
BCA Barrels are manufactured from two types of steel. 4150 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved. 416 Stainless Steel, Heat Treated to RC 28-32 Hardness, and Stress Relieved. They are Drilled, Reamed, Rifled, Turned, and if Applicable, fluted on CNC Machines. All of these machines are located at 310 McNeill Road, Sanford, NC. All of the machining of the Barrels is completed by BCA. All our Finished Barrels go through a 100% Inspection Process. Inspections Equipment includes CMMs and Air Gauges for the Bores. BCA has Engineers with over 40 years machining experience. Our Barrels are manufactured under the ISO-9002 Quality Systems. Since 2013 BCA has shipped thousands of barrels all over the US Our customers are Gun Manufacturers, Dealers, and Individuals. We have shipped as many as 2,000 Barrels a week to one customer. BCA's expectations is that our Barrels, 16 inch or longer, will hold a 1.000" MOA at 100 yards with appropriate ammo and shooting techniques. We have rifle manufactures that have reported regular production barrels that shot a .700" MOA. BCA manufactures over 60 different Barrels for the AR 15 Rifles and Pistols.
Ruger P89 semi auto pistol in 9mm caliber. LE Trade-in featuring a safety or decocker, 4.5'' barrel, with a serviceable bore and mechanical condition, and one magazine. The exterior finish shows heavy use and often most of the bluing may be worn off, and there may be scratches and areas of patina. Mag capacity and grip style may vary. Springs may also need to be replaced, overall Fair condition, used. A great project gun if you want to try painting or refinishing a pistol!
Yugoslavian 24/47 8x57 bolt action rifle that was refurbished by the Yugoslavs in the late 1940. Overall in VG condition and C&R eligible, however you will find minor cracks in the stock and handguard, usually small and behind the tang, and may have very minor rust spots. No returns for stock issues.
These are New Old Stock Grips for early model AKM rifles. These grips are
beautiful and still have original russian cosmoline on the metal parts. Don't
miss out on these perfect grips for your next build or to retro your new Rifle.
5 x 30 Round AK-47 mags in a free grade 2 pouch - Used Condition - 7.62x39 European AK47. Mostly Polish or Hungarian but may have other types in the mix, special selection not available. These are 'Used' European military mags, condition will vary mag to mag, expect a mix of conditions between multiple units, mags may have flat grey finish or glossy or flat black finish.
X-GRADE Italian Made Pietro Beretta model 92-S 9mm caliber semi-automatic pistols. These guns just didn't make the cut cosmetically to be sold as the standard grade. They have more finish wear and possibly some very minor pitting if at all. A great shooter or winter project to refinish. The iconic Beretta 92 pistol was the evolution of the M1922 and M1951 designs. It features an open slide design, alloy frame, slide mounted safety/decocker and one of the best sight radius available on a pistol. These pistols were recently imported into the US and appear to be Foreign Law Enforcement or Military trade-ins. As such they are mechanically in excellent condition but do have some metal finish and grip wear as the pictures show. Includes one 15rd magazine.
They are Drilled, Reamed, Rifled, Turned, and if Applicable, fluted on CNC
Machines. All of these machines are located at 310 McNeill Road, Sanford,
NC. All of the machining of the Barrels is completed by BCA. All our
Finished Barrels go through a 100% Inspection Process.
Freedom Munitions Hornady XTP (reman) NOTE: Use Coupon Code GUNDEALS5 To Get This Price And $7.50 Flat Rate Shipping, Orders Over $99! - 124gr HPBR/BO/NC
NOTE: Code gives you $3 off each magzine you purchase, no matter how many. The next generation of AR magazines has arrived and INTRAFUSE is at the forefront with Tapco's 30rd Gen II AR Magazine. It still retains the rugged mag body that the original had, but Tapco has made vast changes to the interior components to improve the overall functionality of the magazine.